RINGFRAME AUDITING FORM

RINGFRAME AUDITING FORM

                RINGFRAME AUDITING FORM

DATE;                                                             M/C NO;

S.NO	INSPECTED PARTS	BEFORE	AFTER
1.
2.	Spl spd
3.	Ct, TM,&TPI
4.	Break draft/W
5.	Total draft/W
6.	Drafting unit/Wheels
7.	Gearend Wheels
8.	Condensor allignment
9.	Roller Settings
10.	Apron centre&tension
11.	Fluttd Roller Brg Condn
12.	Grease nipples &covers
13.	Top roller pressure
14.	Top Roller dia &codn
15.	Front top roller offset
16.	Top roller stgs
17.	Nose bar stgs
18.	Lappet hook stgs
19.	Fn of builder motion
20.	Traveller clearer stgs
21.	SPL &Lappet gauges
22.	Lappet height gauges
23.	Ring rail levl
24.	Spl buttons
25.	Cop content & Dia
26.	Spl tape tensions
27.	Spl tape allignment
28.	Main belt condn
29.	Tin roller Brg Lubrication
30.	Spl oil levl
31.	Total Idles
32.	Count CV%
33.	Strength CV%
34.	Yarn CSP
35.	Breaks/100Spl Hrs

                                          FOR ASSISTANCE CALL +91-98431-79009

AUDITING FORM- DRAW FRAME

    DRAW FRAME AUDITING FORM    (+91-98431-79009)

S.NO	PARTS TO BE INSPECTED	STD	RATING (BEFORE)	RATING (AFTER)
1.	Hank
2.	Del spd
3.	Settings
4.	Total draft
5.	BD&WD
6.	No of Ends & Actual draft
7.	Codn of 1st saddle
8.	Codn of 2nd saddle
9.	Codn of 3rd saddle
10.	Top roller dia
11.	Top roll condn
12.	End bush condn
13.	Top stripper condn
14.	Bottom stripper condn
15.	Flutted roller Brgs condn
16.	Fn of suction systems
17.	Fn of signal lamps
18.	Fn of door limit switches
19.	Fn of creel stop motion
20.	Fn of drafting stop motion
21.	Fn of cal roller stop motion
22.	Fn of doors
23.	Air leakages
24.	Entry plate settings
25.	Creel chain tension
26.	Calender roller wheels
27.	Coiling Formation
28.	0.5Mts CV%
29.	A%

DRAW FRAME AUDITING FORM